Ability to enable backfires when releasing the throttle and/or shifting gears.
Easy installation, without interference with the CAN bus, without the risk of losing warranty.
High quality guaranteed by PANTHERA Automotive GmbH.
The new Panthera Leo ASC 6.0 system collects all necessary information to control the sound from the engine controller via an adapter in the OBD-II port.
Data is transmitted wirelessly, using Bluetooth technology. The controller features new electronics that, in addition to reading RPM and throttle position, also reads real engine load.
The sound generated based on this data is characterized by very realistic sound. Additionally, it is possible to enable backfires when releasing the throttle and/or shifting gears.
The system is pre-configured, but through the Panthera Connect app, it is possible to fine-tune the sound to personal preferences.
You can adjust the volume separately for low and high RPMs. The sound characteristics can be more or less aggressive.
Along with the selection of one of several realistic exhaust sound files, this allows for tuning the system to the character of the car and personal preferences.
Every engine can sound good!
The Panthera Sound Booster active exhaust system is a solution that produces a realistic exhaust sound,
installable in practically any car without interfering with the factory exhaust system.
How does it work?
The Panthera active exhaust consists of one or two Sound Booster sound generators, wiring, and the Active Sound Cube system.
The ASC reads all necessary data, such as load, speed, and engine RPM.
This results in a sporty and realistically sounding exhaust, regardless of the vehicle's engine version.
Control
Volume and sound characteristics can be adjusted individually using an app on iOS and Android.
The package includes a remote control that allows you to turn the sound on/off or switch the operating mode.
The Panthera active exhaust works immediately upon power-up with default settings.
Through the Panthera App, you can change the sound of individual modes.
The following adjustments are available:
VOLUME, separately for low and high RPMs.
RPM, characteristics can be more slow- or fast-revving.
SOUND, characteristics can be more low- or high-toned.
Additionally, effects such as realistic mode, backfires orrev matching on startup can be enabled.
A total of 8 modes with different settings can be programmed.
Mode changes can be done via the remote or through the app.
The system remembers the last selected setting, so after starting the car, nothing needs to be turned on again.
NEW: OBD Diagnostics
The new Panthera Connect app, in addition to controlling the system, adds new features:
Performance Cockpit - reads engine parameters:
• Oil temperature
• Coolant temperature
• Intake air temperature
• Engine load
• Throttle position
• Boost pressure
Diagnostic Tool - Ability to read and clear error codes from the engine controller.
Installation
Installation is easy and quick. Justconnect the power (cigarette lighter socket or fuse box), plugthe connector into the OBD port, and the system is ready to go.
Depending on the sound controller, we suggest 1 or 2 speakers. Up to 4 can be installed.
The Sound Booster speaker can beinstalled inside the car (in the trunk) or outside, on the chassis.
The construction is fully weather-resistant. The manufacturereven allows for "submerging" the speaker in off-road vehicles.
Installation time for most car models is max. 4 hours.
We offer a free replacement car during the installation time.
Upgrade for factory active exhaust
It is possible to enhance the sound of the factory active exhaust used in cars such as Audi, BMW, or Porsche.
The use of Panthera Active Sound Cube electronics allows for changes in volume and sound characteristics, significantly improving the sound of the factory active exhaust.
Main features / advantages of the system
• different sound profiles: 4 Cylinder Boxer, R6 Turbo, V6 Turbo, V8 Muscle, V8 Turbo, V8 SUV, V10 SUV, V12 Supercar, Electro
• Smartphone app control for iOS/Android
• Volume adjustment
• RPM speed adjustment
• Throttle response adjustment
• Rev matching on startup
• Backfires
• No risk of losing warranty
• Easy transfer when changing cars.
• No interference with the CAN bus, no additional coding
• No interference with the original exhaust and car electronics
• Ability to install the speaker under the car or inside the trunk
Package contents
1x Sound Booster speaker (optional second speaker)
1x integrated controller and amplifier Leo Active Sound Cube 6.0
1x Leo OBDII connector
1x remote control (ON/OFF, Eco, Sport, Race)
1x wiring
